-
-
Finished Gabion Products
-
GLEADER（JINLIDA）Enhanced Gleader Mesh
SJ90/33 Single screw plastic extruder (Quantity：1set)
Screw diameter（mm）：90mm
Aspect ratio （L/D）：33:1
Nitriding screw material：
①38CrMoALA Depth 0.6～0.8mm,Hardness HV800～950,Surface
Roughness Ra0.8mm。
② Structure: Barrier type BM and mixing combination screw is used to ensure high quality melt at higher output and lower temperature, and to ensure balanced plasticization and uniform material temperature.
③Maximum extrusion：200-250㎏/h，Highest speed 90r/min.
Screw barrel：1．Material ：38CrMoALA, Hardness HV950, Roughness of inner wall Ra1.2㎜.
④Unique inlet and outlet design, with perfect water cooling device。
⑤The screw with grooved feeding bottom sleeve has the function of enhancing feeding, which guarantees high-speed and high-yield extrusion.
Reducer： High strength alloy steel, hard tooth surface (origin: Jiangyin Guomao or Chongke) helical gear ： Grinding Gear Material for Tooth Surface: Carburizing and Quenching with Maximum Extrusion of 200 kg/h Feed Drum Heating Method： It is heated by cast aluminium heating ring with air groove and stainless steel hood. Barrel Heating Power: 4.5KW Barrel Heating Segments：5 Number of Cooling Sections of Fans：5 Cooling Fan Power: Main Motor Power: Origin: Xian Speed Regulation Method: Variable frequency speed governor Electrical Control System：Thermometer from Japan RKC. AC contactor：Schneider, Low voltage electrical apparatus：chint
MORE
Aspect ratio （L/D）：33:1
Nitriding screw material：
①38CrMoALA Depth 0.6～0.8mm,Hardness HV800～950,Surface
Roughness Ra0.8mm。
② Structure: Barrier type BM and mixing combination screw is used to ensure high quality melt at higher output and lower temperature, and to ensure balanced plasticization and uniform material temperature.
③Maximum extrusion：200-250㎏/h，Highest speed 90r/min.
Screw barrel：1．Material ：38CrMoALA, Hardness HV950, Roughness of inner wall Ra1.2㎜.
④Unique inlet and outlet design, with perfect water cooling device。
⑤The screw with grooved feeding bottom sleeve has the function of enhancing feeding, which guarantees high-speed and high-yield extrusion.
Reducer： High strength alloy steel, hard tooth surface (origin: Jiangyin Guomao or Chongke) helical gear ： Grinding Gear Material for Tooth Surface: Carburizing and Quenching with Maximum Extrusion of 200 kg/h Feed Drum Heating Method： It is heated by cast aluminium heating ring with air groove and stainless steel hood. Barrel Heating Power: 4.5KW Barrel Heating Segments：5 Number of Cooling Sections of Fans：5 Cooling Fan Power: Main Motor Power: Origin: Xian Speed Regulation Method: Variable frequency speed governor Electrical Control System：Thermometer from Japan RKC. AC contactor：Schneider, Low voltage electrical apparatus：chint
Hydraulic Network Converter and Hydraulic Station(Quantity：1set)
Specification, type and parameters of switcher: 90 single board switching device
Size: L1（205mm）,L2(130mm),L3(880mm)
Switcher Weight：170KG
Mesh Diameter：200mm
Heating Method: Heating rod
Heating Voltage and Power: (220v)/(50hz) Heating Power: 8KW
Maximum Pressure of Solution：≦45
Configuration of Hydraulic Station: motor power (380V)/(50HZ)
Power: 2.2KW
MORE
Size: L1（205mm）,L2(130mm),L3(880mm)
Switcher Weight：170KG
Mesh Diameter：200mm
Heating Method: Heating rod
Heating Voltage and Power: (220v)/(50hz) Heating Power: 8KW
Maximum Pressure of Solution：≦45
Configuration of Hydraulic Station: motor power (380V)/(50HZ)
Power: 2.2KW
Metering melt pump (with reducer) (Quantity：1set)
Type of Metering Pump: 100CC metering pump
Supply Voltage：(220v)/(50hz) Heating Power：2.4KW
Heating Method: Heating rodl
MORE
Supply Voltage：(220v)/(50hz) Heating Power：2.4KW
Heating Method: Heating rodl
Office Address：
Add:Room 2901, Shijin Center, Qingyang Road, Yangming Street, Liangxi District, Wuxi
Factory Address：Add:No. 8 Xinda Road, Zhutang Town, Jiangyin City, Jiangsu Province, China
Tel:+86-510-82703986
E-mail:sale@gabion.cn
Copyright © 2023 WuXi Gleader Ecological Technology Co.,Ltd. 丨 Business license
